[Jan 08, 2026] Lesson Brilliant PDF for the CCFA-200b Tests Free Updated Today

Get New 2026 Valid Practice CrowdStrike Certified Falcon Administrator CCFA-200b Q&A - Testing Engine

NEW QUESTION # 56
Which of the following is TRUE regarding Falcon Next-Gen AntiVirus (NGAV)?

• A. The Detection sliders cannot be set to a value less aggressive than the Prevention sliders
• B. Falcon NGAV relies on signature-based detections
• C. Activating Falcon NGAV will also enable all detection and prevention settings in the entire policy
• D. Falcon NGAV is not a replacement for Windows Defender or other antivirus programs

Answer: A

Explanation:
The Detection sliders cannot be set to a value less aggressive than the Prevention sliders in Falcon Next-Gen AntiVirus (NGAV). This is because prevention is a subset of detection, and it would not make sense to prevent threats that are not detected. The other options are either incorrect or not true of Falcon NGAV.

NEW QUESTION # 57
What is the goal of a Network Containment Policy?

• A. Partition a network for privacy
• B. Gain more visibility into network activities
• C. Limit the impact of a compromised host on the network
• D. Increase the aggressiveness of the assigned prevention policy

Answer: C

Explanation:
The goal of a Network Containment Policy is to limit the impact of a compromised host on the network. This policy allows users to isolate a host from the network, while still allowing it to communicate with the Falcon Cloud and other essential services. This can help prevent further damage or data exfiltration from a compromised host. The other options are either incorrect or not related to the policy.

NEW QUESTION # 58
Which of the following scenarios best describes when you would add IP addresses to the containment policy?

• A. Your organization has additional IP addresses that need to be able to access the Falcon console
• B. Your organization has resources that need to be accessible when hosts are network contained
• C. You want to automate the Network Containment process based on the IP address of a host
• D. A new group of analysts need to be able to place hosts under Network Containment

Answer: B

Explanation:
The scenario that best describes when you would add IP addresses to the containment policy is that your organization has resources that need to be accessible when hosts are network contained. As explained in the previous question, adding IP addresses to the containment policy allows you to create an allowlist of trusted IP addresses that can communicate with your contained hosts. This can be useful when you need to isolate a host from the network due to a potential compromise or investigation, but still want to allow it to access certain resources or services that are essential for your organization's operations or security.

NEW QUESTION # 59
From the Host management page, what is the best field to filter by for Domain Controllers to obtain sensor version information?

• A. Sensor Version
• B. Type
• C. OS Version
• D. Platform

Answer: B

NEW QUESTION # 60
What is the purpose of a containment policy?

• A. To define the duration of Network Containment
• B. To define the trigger under which a machine is put in Network Containment (e.g. a critical detection)
• C. To define allowed IP addresses over which your hosts will communicate when contained
• D. To define which Falcon analysts can contain endpoints

Answer: C

Explanation:
In the Containment Policy page have the title "Network traffic allowlist" and it only allows to add IPs or CIDR networks to exclude in the moment of the isolation of any host, because it is a global policy, not allowing make distinctions between machines.

NEW QUESTION # 61
When creating a Host Group for all Workstations in an environment, what is the best method to ensure all workstation hosts are added to the group?

• A. Create a Static Group with Type=Workstation Assignment
• B. Create a Static Group and Import all Workstations
• C. Create a Dynamic Group and Import All Workstations
• D. Create a Dynamic Group with Type=Workstation Assignment

Answer: D

Explanation:
The best method to ensure all workstation hosts are added to the group is to create a Dynamic Group with Type=Workstation Assignment. A Dynamic Group is a group that automatically updates its membership based on certain criteria or filters. A Type=Workstation Assignment filter will match all hosts that have the workstation type assigned in their Active Directory domain. This way, any new or existing workstation hosts will be added to the group without manual intervention.

NEW QUESTION # 62
On which page of the Falcon console can one locate the Customer ID (CID)?

• A. Sensor Dashboard
• B. Sensor Downloads
• C. Hosts Management
• D. API Clients and Keys

Answer: D

Explanation:
The page of the Falcon console where one can locate the Customer ID (CID) is API Clients and Keys. The API Clients and Keys page allows you to create and manage API clients and keys for accessing the Falcon platform programmatically. The Customer ID (CID) is a unique identifier for your organization that is required for authenticating your API requests. You can find your CID at the top of the API Clients and Keys page.

NEW QUESTION # 63
You are tasked with creating a group for hosts running Windows 10.
What kind of group should you create to make sure all applicable hosts are included in your environment?

• A. Create a dynamic group with the assignment rule criteria for OS Version set to Windows 10
• B. Create a static group with the assignment rule criteria set to OS Type Workstation
• C. Create a static group with the assignment rule criteria for OS Version set to Windows 10
• D. Create a dynamic group with the assignment rule criteria set to OS Type Workstation

Answer: A

NEW QUESTION # 64
When editing an existing IOA exclusion, what can NOT be edited?

• A. All parts of the exclusion can be changed
• B. The exclusion name
• C. The hosts groups
• D. The IOA name

Answer: D

Explanation:
When editing an existing IOA exclusion, the IOA name cannot be edited. An IOA (indicator of attack) exclusion allows you to define custom rules for excluding suspicious behavior from detection or prevention based on process execution, file write, network connection, or registry events. The IOA name is a predefined name that identifies the type of IOA behavior that you want to exclude, such as "Suspicious Process Execution - Script Interpreter Executing File". The IOA name cannot be changed when editing an existing IOA exclusion, as it is linked to a specific IOA rule in the Falcon platform. However, you can edit other parts of the IOA exclusion, such as the exclusion name, the hosts groups, and the filter criteria.

NEW QUESTION # 65
If a user wanted to install an older version of the Falcon sensor, how would they find the older installer file?

• A. By installing the current sensor and clicking the "downgrade" button during the install
• B. Older versions of the sensor are not available for download
• C. By clicking on "Older versions" links under the Host setup and management > Deploy > Sensor downloads
• D. By emailing CrowdStrike support at [email protected]

Answer: C

Explanation:
The way to find the older installer file for the Falcon sensor is to click on "Older versions" links under the Host setup and management > Deploy > Sensor downloads. The Sensor downloads page allows you to download the latest version of the Falcon sensor for different operating systems and platforms. However, if you need to install an older version of the sensor, you can click on the "Older versions" links below each sensor download button. This will open a new page where you can select and download any previous version of the sensor.

NEW QUESTION # 66
Which port and protocol does the sensor use to communicate with the CrowdStrike Cloud?

• A. TCP port 80 (HTTP)
• B. TCP UDP port 53 (DNS)
• C. TCP port 443 (HTTPS)
• D. TCP port 22 (SSH)

Answer: C

Explanation:
The sensor uses TCP port 443 (HTTPS) to communicate with the CrowdStrike Cloud. This port and protocol are used to securely send and receive data between the sensor and the cloud, such as detections, policies, updates, commands, etc. The other options are either incorrect or not used by the sensor.

NEW QUESTION # 67
What is the purpose of the "Auto - Latest" setting in a sensor update policy?

• A. This setting automatically assigns the latest Indicator of Attack (IOA) profiles and Next-Gen Antivirus (NGAV) machine learning to the selected endpoints ensuring the highest level of security
• B. This setting will cause all assigned hosts to be updated to the most current version as soon as it becomes available
• C. This setting overrides any user confirmation/interaction and applies the selected policy
• D. This setting automatically assigns new hosts that come online to this policy

Answer: B

NEW QUESTION # 68
An inactive host that does not contact the Falcon cloud will be automatically removed from the Host Management and Trash pages after how many days?

• A. 90 Days
• B. 45 Days
• C. 75 Days
• D. 60 Days

Answer: A

Explanation:
An inactive host that does not contact the Falcon cloud will be automatically removed from the Host Management and Trash pages after 90 days. An inactive host is a host that has not communicated with the Falcon platform for more than seven days. An inactive host will be moved from the Host Management page to the Trash page after seven days of inactivity. An inactive host will remain in the Trash page for 90 days before being permanently deleted from the Falcon platform. You can restore an inactive host from the Trash page if it becomes active again within
90 days.

NEW QUESTION # 69
To improve the organization's security posture, you are designing a Fusion SOAR workflow to generate an alert when critical vulnerabilities are detected by Falcon.
When creating a new workflow from scratch, what component of the workflow must be configured first?

• A. Workflow Name
• B. Condition
• C. Action
• D. Trigger

Answer: D

NEW QUESTION # 70
The Customer ID (CID) is important in which of the following scenarios?

• A. When adding a user to the Falcon console under the Users application
• B. When setting up API keys
• C. When performing the sensor installation process
• D. When performing a Host Search

Answer: C

Explanation:
The Customer ID (CID) is important in which of the following scenarios: when performing the sensor installation process and when setting up API keys. The CID is a unique identifier for your organization that is required for authenticating your sensor installation and communication with the Falcon cloud. You need to provide your CID when installing the Falcon sensor on a host, either by using a command-line parameter or by using the falconctl tool. The CID is also required for setting up API keys, which are used for accessing the Falcon platform programmatically via the Falcon APIs. You need to provide your CID when creating an API client and key in the API Clients and Keys page in the Falcon console.

NEW QUESTION # 71
Where can you find your company's Customer ID (CID)?

• A. The CID is located at Hosts > Host Management
• B. The CID is located at Hosts setup and management > Deploy > Sensor Downloads and is listed along with the checksum
• C. The CID is a secret key used for Falcon communication and is never shared with the customer
• D. The CID is only available by calling support

Answer: B

Explanation:
The CID (Customer ID) is located at Hosts setup and management > Deploy > Sensor Downloads and is listed along with the checksum. The CID is a unique identifier for your organization that is required for authenticating your sensor installation and communication with the Falcon cloud. The checksum is a value that verifies the integrity of the sensor download file.
You can find your CID and checksum at the top of the Sensor Downloads page.

NEW QUESTION # 72
......

CCFA-200b Dumps PDF - 100% Passing Guarantee: https://examtorrent.vce4dumps.com/CCFA-200b-latest-dumps.html