Free 200-301 Sample Questions and 100% Cover Real Exam Questions (Updated 875 Questions)
Download Real Cisco 200-301 Exam Dumps Test Engine Exam Questions
Each of these objectives comes with a specific set of skills that are described in detail below:
This topic includes the following skills: explaining the network components role; describing network topology architectures; comparing cabling and physical interface types; defining cable and interface issues (collisions, speed, errors, mismatch duplex); comparing TCP and UDP; customizing and verifying subnetting IPv4 subnetting and addressing; describing the necessity of private IPv4 addressing; customizing and verifying IPv6 prefix and addressing; comparing IPv6 address types; verifying IP parameters for Client OS (Linux, Windows, Mac OS); describing switching principles; explaining wireless concepts; explaining virtualization basics (virtual machines).
Within this domain, the examinees need to demonstrate their ability to: interpret the routing table components (routing protocol code, network mask, prefix, next hop, last resort gateway, administrative distance, metric); customize IPv4 and IPv6 static routing (host route, default route, floating static, network route); identify how a router makes a forwarding decision by default (administrative distance, longest match, routing protocol metric); customize and verify single area OSPFv2 (point-to-point, neighbor adjacencies, router ID, broadcast); explain the objective of first hop redundancy protocol.
This subject area evaluates the following skills of the candidates: identifying core security concepts (vulnerabilities, threats, exploits, mitigation techniques); explaining security program elements (physical access control, user awareness, and training); customizing device access control using local passwords; explaining the elements of security password policies, including complexity, management, password alternatives (multifactor authentication, certificates, and biometrics); describing site-to-site VPNs and remote access; configuring and verifying access control lists; configuring security features of Layer 2 (dynamic ARP inspection, DHCP snooping, port security); differentiating accounting, authentication, and authorization concepts; describing WPA, WPA2, and WPA3 security protocols; customizing WLAN with the help of WPA2 PSK.
Here the applicants need to demonstrate that they are capable of: explaining how automation affects network management; distinguishing traditional networks from controller-based networking; describing software defined and controller-based architectures (fabric, overlay, underlay); distinguishing traditional campus device management from Cisco DNA Center enabled device management; describing REST-based APIs characteristics (data encoding, CRUD, HTTP verbs); recognizing the abilities of Puppet, Chef, and Ansible configuration management mechanisms; interpreting JSON encoded data.
This objective combines the questions that check competency of the test takers in: customizing and verifying within source NAT with the help of static and pools; customizing and verifying NTP operating in a server and client mode; explaining the function of DHCP and DNS within the network; explaining the role of SNMP in executing network operations; describing the utilization of syslog features including facilities and levels; customizing and verifying DHCP relay and client; explaining the forwarding per-hop behavior (PHB) for QoS, including classification, queuing, marking, shaping, congestion, policing; customizing remote access network devices with the help of SSH; describing the function of TFTP/FTP in the network.
The Cisco 200-301 exam is a comprehensive exam that covers a broad range of topics related to networking. It tests the candidate's understanding of network fundamentals, network access, IP connectivity, IP services, security fundamentals, automation, and programmability. The exam also covers wireless networking concepts and network architecture.
NEW QUESTION # 88
Refer to the exhibit.
Which type of route does R1 use to reach host 10.10.13.10/32?
- A. floating static route
- B. host route
- C. network route
- D. default route
Answer: C
NEW QUESTION # 89
Drag and Drop Question
A network engineer is configuring an OSPFv2 neighbor adjacency. Drag and drop the parameters from the left onto their required categories on the right. No all parameters are used.
Select and Place:
Answer:
Explanation:
NEW QUESTION # 90
Drag and drop the descriptions of file-transfer protocols from the left onto the correct protocols on the right.
Answer:
Explanation:
NEW QUESTION # 91
What software defined architecture plane assists network devices with making packet-forwarding decisions by providing Layer 2 reachability and Layer 3 routing information?
- A. management plane
- B. control plane
- C. data plane
- D. policy plane
Answer: B
Explanation:
The control plane is the part of a network that controls how data is forwarded, while the data plane controls the actual forwarding process.
Making packet forwarding decisions is 'how data is forwarded'.
NEW QUESTION # 92
Refer to the exhibit. How will the router handle a packet destined for 192.0.2.156?
- A. The router will forward the packet via Serial2.
- B. The router will forward the packet via either Serial0 or Serial1.
- C. The router will return the packet to its source.
- D. The router will drop the packet.
Answer: A
NEW QUESTION # 93 
Refer to the exhibit. If configuring a static default route on the router with the ip route 0.0.0.0 0.0.0.0 10.13.0.1
120 command, how does the router respond?
- A. It starts load-balancing traffic between the two default routes.
- B. It starts sending traffic without a specific matching entry in the routing table to GigabitEthernet0/1.
- C. It ignores the new static route until the existing OSPF default route is removed.
- D. It immediately replaces the existing OSPF route in the routing table with the newly configured static route.
Answer: C
Explanation:
Section: IP Connectivity
NEW QUESTION # 94
Drag and drop the QoS congestion management terms from the left onto the description on the right.
Answer:
Explanation:
NEW QUESTION # 95
Refer to the exhibit.
An administrator is tasked with configuring a voice VLAN. What is the expected outcome when a Cisco phone is connected to the GigabitEfriemet3/1/4 port on a switch?
- A. The phone and a workstation that is connected to the phone send and receive data in VLAN 50.
- B. The phone sends and receives data in VLAN 50, but a workstation connected to the phone has no VLAN connectivity
- C. The phone and a workstation that is connected to the phone do not have VLAN connectivity
- D. The phone sends and receives data in VLAN 50, but a workstation connected to the phone sends and receives data in VLAN 1
Answer: D
NEW QUESTION # 96
How do TCP and UDP differ in the way they guarantee packet delivery?
- A. TCP uses checksum, acknowledgements, and retransmissions, and UDP uses checksums only
- B. TCP uses checksum, parity checks, and retransmissions, and UDP uses acknowledgements only
- C. TCP uses two-dimensional parity checks, checksums, and cyclic redundancy checks, and UDP uses retransmissions only
- D. TCP uses retransmissions, acknowledgment, and parity checks, and UDP uses cyclic redundancy checks only
Answer: A
Explanation:
Section: Network Fundamentals
NEW QUESTION # 97
Refer to the diagram.
All hosts have connectivity with one another.
Which statements describe the addressing scheme that is in use in the network? (Choose three.)
- A. The subnet mask in use is 255.255.255.192
- B. The IP address 172.16.1.25 can be assigned to hosts in VLAN1
- C. The LAN interface of the router is configured with multiple IP addresses.
- D. The IP address 172.16.1.205 can be assigned to hosts in VLAN1
- E. The LAN interface of the router is configured with one IP address.
- F. The subnet mask in use is 255.255.255.128
Answer: B,C,F
NEW QUESTION # 98
What is new in HSRPv2?
- A. a greater number in hsrp group field
- B. prempt
Answer: A
NEW QUESTION # 99
An engineer is configuring an encrypted password for the enable command on a router where the local user database has already been configured Drag and drop the configuration commands from the left into the correct sequence on the right Not all commands are used
Answer:
Explanation:
NEW QUESTION # 100
Refer to the exhibit.
If OSPF is running on this network, how does Router 2 handle traffic from Site B to 10.10.13/25 at Site A?
- A. It sends packets out of interface Fa0/1 only.
- B. It cannot send packets to 10.10.13 128/25
- C. It sends packets out of interface Fa0/2 only.
- D. It load-balances traffic out of Fa0/1 and Fa0/2
Answer: D
NEW QUESTION # 101
Drag and drop the AAA features from the left onto the corresponding AAA security services on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 102
An organization has decided to start using cloud-provided services. Which cloud service allows the organization to install its own operating system on a virtual machine?
- A. software-as-a-service
- B. platform-as-a-service
- C. network-as-a-service
- D. infrastructure-as-a-service
Answer: D
Explanation:
Section: Automation and Programmability
Explanation
Explanation/Reference:
NEW QUESTION # 103
A frame that enters a switch fails the Frame Check Sequence. Which two interface counters are incremented? (Choose two)
- A. CRC
- B. giants
- C. runts
- D. frame
- E. input errors
Answer: A,E
Explanation:
Whenever the physical transmission has problems, the receiving device might receive a frame whose bits have changed values. These frames do not pass the error detection logic as implemented in the FCS field in the Ethernet trailer. The receiving device discards the frame and counts it as some kind of input error.
Cisco switches list this error as a CRC error. Cyclic redundancy check (CRC) is a term related to how the FCS math detects an error.
The "input errors" includes runts, giants, no buffer, CRC, frame, overrun, and ignored counts.
The output below show the interface counters with the "show interface s0/0/0" command:
NEW QUESTION # 104
Which two spanning-tree port states does RSTP combine to allow faster convergence? (Choose two.)
- A. listening
- B. blocking
- C. discarding
- D. forwarding
- E. learning
Answer: A,B
NEW QUESTION # 105
Refer to the exhibit.
What commands are needed to add a subinterface to Ethernet0/0 on R1 to allow for VLAN 20, with IP address 10.20.20.1/24?
- A. R1(config)#interface ethernet0/0 R1(config)#ip address 10.20.20.1 255.255.255.0
- B. R1(config)#interface ethernet0/0.20 R1(config)#encapsulation dot1q 20 R1(config)#ip address 10.20.20.1 255.255.255.0
- C. R1(config)#interface ethernet0/0 R1(config)#encapsulation dot1q 20 R1(config)#ip address 10.20.20.1 255.255.255.0
- D. R1(config)#interface ethernet0/0.20 R1(config)#ip address 10.20.20.1 255.255.255.0
Answer: B
NEW QUESTION # 106
Refer to the exhibit.
Drag and drop the networking parameters from the left onto the correct values on the right.
Answer:
Explanation:
NEW QUESTION # 107
Which three elements are fields in a basic Ethernet data frame? (choose three)
- A. Preamble
- B. Version
- C. Frame Check Sequence
- D. Length/Type
- E. Time to Live
- F. Header Checksum
Answer: A,C,D
NEW QUESTION # 108
What are two similarities between UTP Cat 5e and Cat 6a cabling? (Choose two.)
- A. Both support runs of up to 100 meters.
- B. Both support speeds of at least 1 Gigabit.
- C. Both support runs of up to 55 meters.
- D. Both support speeds up to 10 Gigabit.
- E. Both operate at a frequency of 500 MHz.
Answer: A,B
NEW QUESTION # 109
An engineer configured an OSPF neighbor as a designated router.
Which state verifies the designated router is in the proper mode?
- A. Exchange
- B. 2-way
- C. Full
- D. Init
Answer: C
NEW QUESTION # 110 
Refer to the exhibit. An engineer must add a subnet for a new office that will add 20 users to the network.
Which IPv4 network and subnet mask combination does the engineer assign to minimize wasting addresses?
- A. 10.10.225.32 255.255.255.224
- B. 10.10.225.48 255.255.255.224
- C. 10.10.225.48 255.255.255.240
- D. 10.10.225.32 255.255.255.240
Answer: A
NEW QUESTION # 111
What is the default port-security behavior on a trunk link?
- A. It disables the native VLAN configuration as soon as port security is enabled.
- B. It places the port in the err-disabled state if it learns more than one MAC address.
- C. It places the port in the err-disabled slate after 10 MAC addresses are statically configured.
- D. It causes a network loop when a violation occurs.
Answer: D
NEW QUESTION # 112
......
New 200-301 exam dumps Use Updated Cisco Exam: https://examtorrent.vce4dumps.com/200-301-latest-dumps.html