Latest 2022 Realistic Verified AD0-C102 Dumps - 100% Free AD0-C102 Exam Dumps

Get 2022 Updated Free Adobe AD0-C102 Exam Questions and Answer

NEW QUESTION 10
You haw added and adjusted the length of a Wipe transition to the first cut in a montage.
How can you add the same translation to multiple other edit points?

• A. Select the existing Wipe transition. choose Copy, select the other edit points, and Paste.
• B. Use an Adjustment layer and add the Wipe transition to it.
• C. Select the other edit points and drag the Wipe transition from the Effects panel to one of them.
• D. Select the Wipe transition, open the Elect Controls panel, copy the transition, select all the clips, and Paste.

Answer: B

 

NEW QUESTION 11
You are working using the list view in the Project panel and would like to sort clips by date when the original media was created. The needed column is not visible.
How can you make this column visible?

• A. Choose Window > Metadata.
• B. Choose Pile > Project Settings > Metadata.
• C. Choose Clip > Metadata Display.
• D. Right-click on the column header and choose Metadata Display.

Answer: B

 

NEW QUESTION 12
The Timeline panel is active with multiple dips m a sequence. You press the Up arrow key while working in the Timeline and the playhead jumps to the beginning of the sequence.
Why does this happen?

• A. Snap In Timeline is disabled.
• B. The clip is not selected.
• C. Selection Follows Playhead is disabled.
• D. The oily enabled track is empty.

Answer: C

 

NEW QUESTION 13
When you change the label color ofa clip inthe timeline, you also want it to change automatically m the Project panel. How can you accomplish this?

• A. Choose Sequence > Label > Display the project item name and label color for all instances.
• B. Choose Edit > Label > Display the project item name and label color for all instances.
• C. Choose Project Settings dialog > Display the project item name and label color for all Instances.
• D. Choose Clip > Label > Display the project item name and label color for all instances.

Answer: D

 

NEW QUESTION 14
You want to create a custom shortcut to give clips on the Timeline a specific label color.
How do you accomplish this?

• A. Navigate to Sequence > Clip Label Color. Assign shortcut
• B. Right click a clip on the timeline and select Label Color > Assign Shortcut.
• C. Open the Keyboard Shortcuts > label Colors. Assign shortcut.
• D. Open the Keyboard Shortcuts. Assign shortcut

Answer: A

 

NEW QUESTION 15
You shot an interview with two separate cameras, and you notice that the colors of the two cameras do not match. How can you view both clips at the same time to make a comparison?

• A. Choose Comparison View in the Program Monitor panel.
• B. Choose Sequence > Reverse Match frame.
• C. Choose Sequence > Color Comparison View.
• D. Choose Clip > Video Options > Match Frame.

Answer: B

 

NEW QUESTION 16
A graphic in the Source Monitor seems to have a black background and you are not sure if it has an Alpha channel.
How can you set The Source Monitor to display the graphic contents along with areas of Transparency rather than with a black background?

• A. Right click the Source Monitor and choose Overlays > Alpha.
• B. Open the View menu and choose Display Mode > Alpha Channel.
• C. Open the Source Monitor panel menu and choose Show Transparent Pixels.
• D. Open the Source Monitor Settings menu and choose Transparency Grid.

Answer: D

 

NEW QUESTION 17
You have winged all the voice over clips in a sequence on a single track.
How can you conveniently adjust the audio level for the sequence voice over clips?

• A. Select all the clips, right-dick any selected dip, and choose Audio > Set Level To.
• B. Select all the clips, and adjust the rubber band for any clip that has been selected.
• C. In the Audio Track Mixer, adjust the level for the track containing the voice over dips.
• D. In the Audio Clip Mixer, adjust the level for the track containing the voice over clips.

Answer: D

 

NEW QUESTION 18
You need lo dean up a noisy audio clip that has been edited into a sequence.
What is the most efficient way to send a clip from the Timeline panel in Adobe Premiere Pro to Adobe Audition?

• A. Select the clip in the Timeline panel and choose File > Send to Audition.
• B. Drag the clip directly from the Timeline panel into the Files panel in Audition.
• C. Right-click on the clip in the Timeline panel and choose Edit Clip in Audition.
• D. Select the clip in the Timeline panel and choose File > Export > Send to Audition.

Answer: D

 

NEW QUESTION 19
You have added a competeinterviewclip onto a timeline. At the beginning of the dip. there are 10 seconds of material that you want to remove without leavinga gap.
How can you achieve this?

• A. Place the playhead at the location where want this clip to begin and press Q to perform a Ripple Trim to playhead edit.
• B. Select the edit point at the Beginning of your clip and move your playhead to where you want this clip to start and press E.
• C. Enable the Razor Tool to add an edit point at the desired start point and delete the dip to the left of the new edit point.
• D. Using the Selection Tool elide and drag the edit point of the clip and move it to where you want this clip to begin.

Answer: B

 

NEW QUESTION 20
How can you adjust the brightness of the user interface?

• A. Open the Control Surface section of the Preferences and adjust the Brightness control.
• B. Open the Appearance section of the Preferences and adjust the Brightness control.
• C. Choose View > Configure > Adjust Brightness and adjust the Brightness control.
• D. In the Project panel menu, choose Display > Preferences and adjust the Brightness control.

Answer: A

 

NEW QUESTION 21
You want to customize which columns show in the list view of the Project panel. How can you accomplish this?

• A. In the Project panel menu, choose Metadata Display.
• B. In the Metadata panel choose Project Metadata.
• C. Choose Edit > Project Settings > Metadata.
• D. Right click a Bin and choose Metadata Display.

Answer: D

 

NEW QUESTION 22
You want to adjust only the color of the sky of a clip m a sequence. Which tool in Adobe Premiere Pro should you use to do this?

• A. In the Lumetri Color Panel, use the White Balance Selector.
• B. In the Lumetri Color Panel, use Hue Saturation Curves.
• C. Change the clip Blend Mode to Multiply.
• D. Apply the Leave Color Effect to the dip.

Answer: A

 

NEW QUESTION 23
You are -working on a sequence in Adobe Premiere Pro. You would like to create a new graphic in Adobe Photoshop to incorporate in the current sequence. How can you create a new Photoshop file with settings that match the current Premiere Pro sequence?

• A. With the sequence open in the Timeline panel choose File > New > Photoshop File.
• B. With the sequence in the Timeline panel, choose Graphics > New > Photoshop file.
• C. Select the sequence in the Project panel. Choose Photoshop File In the New Hem menu.
• D. In the Essential Graphics panel open the New Layer menu and choose Photoshop File.

Answer: B

 

NEW QUESTION 24
You have multiple voice dips o* varying levels in a sequence.
How can you quickly adjust all the clips to match a consistent level?

• A. Select an the clips and dick Clip > Audio Options > Audio Gain > Normalize Max Peak To and enter the peak amplitude level.
• B. Add the Loudness Radar effect to all tracks In the Audio Track Mixer, and choose the appropriate Broadcast preset for the specific region.
• C. Add the Multiband Compressor effect to all Hacks in (he Audio Track Mixer, and choose the Broadcast preset.
• D. Use the Essential Sound panel to tag dialogue clips as Dialogue and click the Loudness Auto-Match button.

Answer: D

 

NEW QUESTION 25
You are editing in Mercury Playback Engine Software Only mode. You have used several effects that support
32-bit processing-How can you ensure. That the effects are rendered in 32-bit when exporting?

• A. Use Maximum Render Quality.
• B. Choose Performance > Hardware Encoding.
• C. Check Render Alpha Channel Only.
• D. Check Render at Maximum Depth.

Answer: A

 

NEW QUESTION 26
You want to share your sequence with other editorsso they can continue editing. You are not sure all editors ate using the same version of Adobe Premiere Pro What Type of file should you export?

• A. OMF
• B. ALE
• C. MXF
• D. XML

Answer: C

 

NEW QUESTION 27
You have a large amount of clips with similar names in a bin. You are searching for a particular visual event.
Out you're not sure which clip or when the event occurs.
Using default settings, how can you quickly preview the contents of the clips without opening them in the Source Monitor?

• A. Set the bin to Icon view. Select the clip you would line to preview. Move the cursor across the dip thumbnails to see the contents.
• B. Select all the clips in the bin and drag them into the Media Browser panel. Use playback controls to preview their contents.
• C. Set the bin to Icon view. Move the cursor across clip thumbnails without selecting them. The clip contents will be displayed.
• D. Set the bin to Icon view. Mold Command (macOS) / Ctrl (Windows) while moving the cursor across clip thumbnails.

Answer: B

 

NEW QUESTION 28
......

AD0-C102 Dumps PDF and Test Engine Exam Questions: https://examtorrent.vce4dumps.com/AD0-C102-latest-dumps.html