NCM-MCI-5.20 Premium PDF & Test Engine Files with 166 Questions & Answers

Get 100% Real NCM-MCI-5.20 Exam Questions, Accurate & Verified Answers As Seen in the Real Exam!

Nutanix Certified Master - Multicloud Infrastructure (NCM-MCI) 5.20 certification exam is a challenging test of an IT professional's skills and knowledge in the field of multicloud infrastructure solutions. Nutanix Certified Master - Multicloud Infrastructure (NCM-MCI) 5.20 certification is highly valued by businesses that use Nutanix cloud solutions and is an excellent way for IT professionals to demonstrate their expertise in the field of cloud computing.

 

NEW QUESTION # 62
An administrator needs to upgrade AOS for an air gapped cluster by using Prism Element.
Which two actions allow the administrator to perform the upgrade? Choose Two

• A. Manually Upload Binaries to a local http server
• B. Use the LCM dark site Option Providing AOS Binaries
• C. Extract the AOS binaries to the CVM
• D. Manually Upload AOS binaries and metadata

Answer: B,D

NEW QUESTION # 63
An administrator is configuring an All Flash cluster to support the following workloads:
* Full clone virtual desktops
* Hadoop
* Write heavy databases
Which three correct configuration options should the administrator use to meet the item requirements? (Choose three.) For each procedure, indicate whether it is a correct or incorrect procedure that must be configured to meet the item requirements using the drop-down option.

Answer:

Explanation:

Reference:

NEW QUESTION # 64
An administrator needs to provide data integrity at the application level for a VM that is replicated to a secondary site.
Which requirement will satisfy this task?

• A. 1 VM per Consistency Group
• B. 1 VM per schedule
• C. 1 VM per Protection Domain
• D. 1 VM per Availability Zone

Answer: B

NEW QUESTION # 65
For several days, an administrator notices the following alerts:
* CVM NIC Speed Low Warning Alerts
* Warning Alerts of CVM NIC not performing at optimal speed
* CVM is disconnected from the network Critical Alert
* Network Visualization page shows excessive dropped packets on CVM/Host Which steps should be taken to determine which problem should be addressed first?

• A. * Access the Hardware Page to verify resources are available
  * Analyze ail CVM Speed Alerts in the Alerts/Events page
  * Analyze output for the network and interface properties and connectivity issues
• B. * Review Alerts page for NIC speed alerts and alert timing
  * Analyze the genesis.out log file for process failures
  * Assess the NIC properties in the Network Visualization > Host Properties page
• C. * Verify Host/CVM connectivity on the Network Visualization page
  * Use to verify the bridge and bond configuration
  * Review alerts/events page for the CVM disconnected error
• D. * Restart networking services on the CVM
  * Determine the current configuration of the affected CVM via output
  * Access the Alerts/Events page for the CVM network connection failures

Answer: C

NEW QUESTION # 66
Refer to the exhibit.

An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.
What must be changed to enable full inter-VM communications?

• A. Change the spanning-tree port type on the switch
• B. Update the switch to specifically allow VLAN 15
• C. The VMs need to have static IP addresses
• D. Change the network the VMs are connected to

Answer: B

NEW QUESTION # 67
A VM is exhibiting one or more of the following baseline values based on the past 30 days:
* CPU usage < 20%
* CPU ready time < 5%
* Memory usage < 50% (moderately) or < 20% (severely)
* Memory swap rate = 0 Kbps
Which type of VM is being described?

• A. Constrained VM
• B. Bully VM
• C. Inactive VM
• D. Over-Provisioned VM

Answer: D

Explanation:

NEW QUESTION # 68
An administrator receives an error indicating that the CVMs in the cluster are not syncing to any NTP servers. An investigation of the issue finds:
* The NTP servers are configured in Prism
* The time on all CVMs is the same
* Both the CVMs and AHV hosts are configured for the UTC time zone
Which two steps can be taken to troubleshoot this issue? (Choose two.)

• A. Restart the chronos service on all CVMs.
• B. Confirm that the NTP servers are reachable from the CVMs.
• C. On a CVM. run the command a Hash ntpq -pn.
• D. Restart genesis on all CVMs.

Answer: B,C

NEW QUESTION # 69
An administrator is deploying an application that requires maximum I/O throughput for scratch dat a. The administrator is concerned that the throughput requirement is greater than what can be provided by a single cluster node.
What should the administrator do to meet this requirement?

• A. Create a volume group with one virtual disk attached to the VM
• B. Create several virtual disks attached to the VM's virtual SCSI controller
• C. Create a volume group with several virtual disks and attach to the VM
• D. Create a virtual disk attached to the VM's PCI interface

Answer: C

NEW QUESTION # 70
Refer to the exhibit.

An administrator configures Active Directory authentication as shown in the exhibit. Upon finishing setup, users are not able to log in.
What configuration change should be made to fix this issue?

• A. Change the plct from 389 to 636
• B. Change the Directory URL to use an IP rather than a name
• C. Change leaps to https

Answer: A

Explanation:
D Change the Domain to use an IP rather than a name

NEW QUESTION # 71
The following critical Availability Alert displays in prism Central:

The protection Policy PP-BCA-1HR includes a business critical application with a 1-hour snapshot frequency.
What is causing this issue?

• A. NearSync replication between the Availability Zones has fallen out of scope.
• B. There is a scheduled outage for the Availability Zone referenced in Protection Policy PP-BCA-1HR.
• C. Prism Central in the Availability Zone for PP-BCA-1HR is unavailable.
• D. Workloads included in PP-BCA-1HR are no longer within their intended RPO.

Answer: B

NEW QUESTION # 72
Refer to the exhibits.
An administrator has reported that a new VM is not performing well.


After analyzing the information presented in the exhibits, which option shows the best conclusion regarding this workload?

• A. VM is not CPU constrained, because the VM is not running, a multithreaded application.
• B. VM is Storage constrained, because the workload is waiting for storage access.
• C. VM is CPU constrained since the hypervisor cannot provide the required resources.
• D. VM is CPU constrained because more CPU needs to be added to the VM.

Answer: B

NEW QUESTION # 73
Refer to the exhibit.

An administrator creates a security policy that isolates their financial application from accessing the Internet When viewing the policy in Prism Central, several connections from the application are outbound to the Internet.
What is causing this issue with the policy?

• A. The Activate box was not checked in the rule, so it is not enforcing.
• B. The 0.0.0.0 address was not specified in the outbound rule.
• C. The blocked connections are illustrated for information only.
• D. The policy has been left in monitor mode instead of enforcing mode.

Answer: D

Explanation:
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v510:mul-security-policy-management-pc-c.html

NEW QUESTION # 74
Refer to the exhibit.

An administrator has an existing cluster and needs to improve performance using AHV Turbo. Which two items are required to achieve even greater performance? (Choose two.)

• A. Workloads are multi-threaded.
• B. VMs have more than one vCPU.
• C. VMs have one vCPU configured.
• D. VMs have multi-queue disabled.

Answer: A,B

Explanation:

NEW QUESTION # 75
Which statement best defines Replication factor 2 (RF2 ) ?

• A. Data Will be written locally, and a second copy to another disk group
• B. Data will be written locally, and a second copy goes to another node in the same cluster
• C. Data will be written locally, and a second copy goes to a remote site.
• D. data will be written locally and a second copy then will be replicated to another cluster

Answer: B

NEW QUESTION # 76
An administrator has two clusters: Site A and Site B.
Async DR is configured between the clusters as follows:
* Site A is the Primary Site
* Site B is the Secondary inactive Site, no VMs running
* Site A is fully in Production
* Site B used as Backup/Disaster Recovery
The customer wants to perform a planned failover between the sites.
How should the administrator accomplish this?

• A. Click Activate on the Secondary site and run deactive NCLI command on Primary site
• B. Choose Migrate on the Secondary site within the Data Protection Dashboard
• C. Choose Migrate on the Primary site within the Data Protection Dashboard
• D. Click Activate on the Secondary site within the Data Protection Dashboard

Answer: C

NEW QUESTION # 77
An administrator deletes a large amount of data from a Volume Group presented to a Linux VM. The administrator notices that the deleted data has not been reclaimed as usable storage.
What action should be taken to reclaim the storage capacity?

• A. Shrink the Volume Group that is associated with the Linux VM
• B. Enable the unman operation on the Linux VM
• C. Unmount the Volume Group and then Remount the Volume Group
• D. Run Defrag on the Linux VM

Answer: C

Explanation:
https://next.nutanix.com/how-it-works-22/vm-capacity-and-prism-capacity-are-different-33134

NEW QUESTION # 78
A customer has NearSync configured. When the administrator tries to restore a snapshot from 3 minutes ago, it is not available. The snapshots are happening at 15-minute intervals instead of at the 5-minute configured interval. When the protection domain was initially set up, the snapshots were happening at the expected 5-minute interval.
What should the customer do to enable the snapshots to happen at the expected interval?

• A. Change the protection domain to use Async DR
• B. Fix a connectivity issue because the protection domain reverted to Async
• C. Configure the protection domain to take snapshots on 15-minute intervals
• D. Utilize Metro Availability to meet this requirement

Answer: B

NEW QUESTION # 79
An administrator is deploying a three-tier application on a Nutanix Enterprise Cloud consisting of web, application, and database VMs. Traffic between the servers must be limited to specific services/ports. There is an application layer firewall VM deployed on one host in the cluster.
In which way should the administrator meet this requirement?

• A. Separate the web. application and database VMs on to dedicated VLANs
• B. Create a network for each type of VM, and use policy-based routing to control the traffic flow
• C. Categorize the VMs in Prism Central and utilize Flow to set a security policy
• D. Configure a security policy and service chain redirecting the server traffic through the firewall

Answer: C

NEW QUESTION # 80
A company needs to replicate their VMs to a remote site and must have an RPO of less than 1 hour.
When creating a protection domain, what should an administrator do to meet this requirement?

• A. Enable Entity Sync on the designated VMs
• B. Enable Near-Sync Replication with an RPO of 15 minutes
• C. Enable Availability Zones and send the VM to multiple targets
• D. Enable Async Replication with an RPO of 60 minutes

Answer: D

NEW QUESTION # 81
An administrator has a custom backup application that requires a 2TB disk and runs in Windows. Throughput is considerably lower than expected.
The application was installed on a VM with the following configuration:
* Four vCPUs with one core/vCPU
* 4GB of Memory
* One 50GB vDisk for the Windows installation
* One 2TB vDisk for the application
What is the recommended configuration change to improve throughput?

• A. Increase the vCPUs assigned to the VM
• B. Add 4GB of memory to the VM
• C. Span the 2TB disk across four vDisks
• D. Increase the number of cores per vCPU

Answer: C

NEW QUESTION # 82
An administrator is deploying a new application to a Nutanix Enterprise Cloud. The application requires a security to prevent unauthorized access. The application also uses many non-standard ports that are unique to it. Security should not be changed for existing applications.
What should the administrator do to meet these requirement?

• A. Create new categories for the VMs, and modify existing security policies to include the new categories.
• B. Use existing categories for the VMs. and create new security policies to use the existing categories.
• C. Create new categories for the VMs, and create new security policies that include the new categories.
• D. Use existing categories for the VMs and modify existing security policies to include the specific port.

Answer: C

NEW QUESTION # 83
An administrator is configuring software only. Data-at-Rest Encryption on their Nutanix cluster. They are planning to deploy a third-party key management server (KMS).
Where should this server be hosted?

• A. On hardware external to the Nutanix duster
• B. As a clustered VM setup on the Nutanix cluster
• C. As a single VM on the Nutanix cluster
• D. As a single VM deployed on the host that contains the Prism leader CVM

Answer: A

Explanation:

NEW QUESTION # 84
In a Nutanix cluster, a Protection Domain contains 50 entities that are replicated to a remote Single Node Replication Target.
The current schedule configuration is as follows:
* Repeat every 6 hours
* Local Retention Policy 1
* Remote Retention Policy 8
* Starting time 12 am
At 8 am on Monday, the administrator discovers that a protected VM is corrupted. The latest good state was Sunday 2 pm. The administrator needs to maintain current protection.
Which strategy should the administrator use to meet these requirements?

• A. From the local site, restore the VM from the local snapshot by selecting the correct snapshot.
• B. From the Remote site, restore the VM from the local snapshot by selecting the correct snapshot
• C. From the local site, retrieve the correct remote snapshot, then restore the VM locally.
• D. From the Remote site, activate the Protection Domain, then re-protect the entity.

Answer: C

NEW QUESTION # 85
A new Nutanix cluster is ready for production on a remote site with no IT staff. Changes to the infrastructure will cost money and probably cause a cluster stop. The administrator needs to perform a health check on the environment that should include:
* Network connectivity checks
* Network performance status
* Storage performance status
Which tool should be used to perform this test?

• A. diagnostic, py
• B. NCC
• C. clurator_cli
• D. X-Ray

Answer: B

NEW QUESTION # 86
......

NCM-MCI-5.20 Premium Files Practice Valid Exam Dumps Question: https://examtorrent.vce4dumps.com/NCM-MCI-5.20-latest-dumps.html