Network Appliance NS0-014 Exam Questions (Updated 2026) 100% Real Question Answers

Pass Network Appliance NS0-014 Exam Quickly With VCE4Dumps

NEW QUESTION # 11
If the metrocluster check command returns errors, what is the most likely next step?

• A. Reinstall MetroCluster
• B. Replace the storage controllers
• C. Perform a manual switchover
• D. Analyze the error logs in Config Advisor

Answer: D

NEW QUESTION # 12
Which two network configurations are supported by MetroCluster? (Select two)

• A. MPLS MetroCluster
• B. FC MetroCluster
• C. IP MetroCluster
• D. VPN MetroCluster

Answer: B,C

NEW QUESTION # 13
Which two tasks should be completed after expanding a MetroCluster configuration? (Select two)

• A. Test inter-site connectivity and latency
• B. Disconnect secondary sites temporarily
• C. Reinstall the Mediator software
• D. Validate SyncMirror functionality

Answer: A,D

NEW QUESTION # 14
An administrator is asked to do a nondisruptive system refresh, replacing all their NetApp FAS8200 controllers and disk shelves with newer NetApp AFF A900 controllers and disk shelves.
Which two actions should the administrator take to migrate the data onto the new nodes before retiring the old controllers? (Choose two.)

• A. Perform a volume move.
• B. Perform an aggregate relocate.
• C. Create a network failover group.
• D. Create a second DR group.

Answer: A,D

NEW QUESTION # 15
What does the ONTAP Mediator specifically manage in an IP MetroCluster configuration?

• A. Data deduplication
• B. Load balancing
• C. Cluster failover events
• D. Data synchronization

Answer: C

NEW QUESTION # 16
What role does the Mediator play in a MetroCluster setup?

• A. Handles day-to-day management of storage
• B. Manages data replication settings
• C. Optimizes storage performance
• D. Manages and coordinates failover between sites

Answer: D

NEW QUESTION # 17
What is the primary challenge when expanding a MetroCluster configuration?

• A. Providing backup power supplies
• B. Upgrading the Mediator software
• C. Synchronizing user permissions
• D. Ensuring all components are compatible

Answer: D

NEW QUESTION # 18
Which ONTAP feature allows MetroCluster administrators to non-disruptively upgrade their environment to a new ONTAP version?

• A. SnapVault
• B. SVM DR
• C. Automated Non-Disruptive Upgrade (NDU)
• D. SnapMirror

Answer: C

NEW QUESTION # 19
What does the MetroCluster Tiebreaker monitor to determine if a failover should occur?

• A. Data replication status
• B. Inter-site latency
• C. Mediator heartbeat
• D. Site availability

Answer: D

NEW QUESTION # 20
What is the purpose of the MetroCluster Tiebreaker software in a MetroCluster configuration?

• A. To replicate data asynchronously between sites
• B. To optimize network performance
• C. To manage ATTO FibreBridges
• D. To monitor the health of the clusters and manage failover

Answer: D

NEW QUESTION # 21
Which of the following is a major advantage of using IP MetroCluster over FC MetroCluster?

• A. Lower bandwidth requirements
• B. Easier to deploy over long distances
• C. Increased data redundancy
• D. Reduced need for FC switches

Answer: B

NEW QUESTION # 22
What is the first step when installing a MetroCluster configuration?

• A. Install the ONTAP Mediator
• B. Validate hardware and site readiness
• C. Install the ATTO bridges
• D. Set up the SyncMirror configuration

Answer: B

NEW QUESTION # 23
Which tool is used to verify a customer environment's compatibility with MetroCluster before deployment?

• A. OnCommand Workflow Automation
• B. Config Advisor
• C. SnapCenter
• D. System Manager

Answer: B

NEW QUESTION # 24
What are two requirements when transitioning from an FC MetroCluster to an IP MetroCluster configuration? (Select two)

• A. Implementation of IP switches
• B. Upgrade to ONTAP 9
• C. Removal of all FC switches
• D. Install ATTO FibreBridges

Answer: A,B

NEW QUESTION # 25
Which task is essential when expanding a MetroCluster system to support additional storage nodes?

• A. Remove ATTO FibreBridges
• B. Reinstall all controllers
• C. Disable all replication processes
• D. Add new storage shelves and validate SyncMirror configuration

Answer: D

NEW QUESTION # 26
How does NetApp MetroCluster ensure continuous availability in case of hardware failure at one site?

• A. Load balancing
• B. Automatic failover to the secondary site
• C. Deduplication of critical data
• D. SnapMirror

Answer: B

NEW QUESTION # 27
What is the primary role of the ATTO FibreBridge in a MetroCluster configuration?

• A. Optimize network performance
• B. Provide redundancy for network paths
• C. Convert IP to Fibre Channel traffic
• D. Connect disk shelves to controllers

Answer: D

NEW QUESTION # 28
When expanding a MetroCluster configuration, what must be considered regarding inter-site connectivity?

• A. Network bandwidth and latency between sites
• B. The cooling system efficiency
• C. The number of controller nodes
• D. The number of users accessing the system

Answer: A

NEW QUESTION # 29
What are two benefits of performing a Non-Disruptive Upgrade (NDU) in a MetroCluster environment? (Select two)

• A. Immediate application of all new features
• B. Reduced risk of data loss
• C. Higher system performance during the upgrade
• D. Avoidance of service outages

Answer: B,D

NEW QUESTION # 30
What is the primary difference between FC MetroCluster and IP MetroCluster?

• A. FC MetroCluster supports longer distances
• B. IP MetroCluster uses Fibre Channel for replication
• C. FC MetroCluster does not support synchronous replication
• D. IP MetroCluster uses IP-based interconnects for data replication

Answer: D

NEW QUESTION # 31
Which two components are required when setting up an IP-based MetroCluster configuration?
(Select two)

• A. SnapMirror software
• B. IP switches with proper redundancy
• C. ONTAP Mediator
• D. ATTO FibreBridge

Answer: B,C

NEW QUESTION # 32
During a MetroCluster installation, which component is responsible for ensuring automatic failover in the event of a site failure?

• A. SnapVault
• B. SyncMirror
• C. ONTAP Mediator
• D. ATTO FibreBridge

Answer: C

NEW QUESTION # 33
......

Real Network Appliance NS0-014 Exam Questions [Updated 2026]: https://examtorrent.vce4dumps.com/NS0-014-latest-dumps.html