Pass Your 301a Exam Easily - Real 301a Practice Dump Updated Apr 09, 2023

2023 Realistic Verified Free F5 301a Exam Questions

NEW QUESTION # 32
To improve application security, an LTM Specialist must configure a BIG application access. The BIG IP system to authenticate the client certificate before permitting application access. The BIG-IP system must also support the ability to red to redirect users to a certificate enrolment system without generating a browser error.
Within the Client SSL profile, which value should the LTM Specialist select for the Client Certificate option?

• A. Request
• B. Demand
• C. ignore
• D. Require

Answer: D

NEW QUESTION # 33
TWO LTM devices are in the same Device Group and configured for Ac live/Standby Failover. The LTM Specialist observes that the HA Active and Standby device constantly changes state. All network links use the default route domain A dedicated fiber ink is used for the HA connection with a latency of 250 ms but no packet loss.
What is causing the change in failover state to occur?

• A. The HA network is not configured for mirroring.
• B. The HA network is using the default routing domain.
• C. The HA network is using multicast IP.
• D. The HA network latency is too high.

Answer: C

Explanation:

NEW QUESTION # 34
An LTM Specialist is configuring a client profile to offload processing a new application Company policy requires that clients can resume session for up to 30 minutes, but must renegotiate a new session after that.
Which setting should the LTM Specialist change to satisfy this requirement?

• A. Cache timeout
• B. Renegotiate Max Record Delay
• C. Renegotiation period
• D. Cache size

Answer: A

Explanation:
Question stem requires that you can resume SSL session within 30 minutes, then you need to define the ssl cache time in 30 minutes

NEW QUESTION # 35
An TLM Specialist has an Exchange that must use the LTM device to route traffic to the internet.
Which SNAT/NAT configure allows the Exchange server's traffic access the internet through the LTM device?

• A. SNAT List
• B. NAT
• C. SNAT Automap
• D. SNAT Pool

Answer: A

NEW QUESTION # 36
An LTM Specialist is the administrator of an HA pair that contains two BIG IP units and one floating traffic group (TG1). A new project requires the creation of 30 virtual servers. The Specialist decides to create a new floating traffic group (TG2) to handle this requirement. Objects for this project created by the BIG-IP Managers must appears in the correct traffic group.
Which configuration should the LTM Specialist use to meet the requirement?

• A. Restrict the Traffic Group Access of BIG-I Managers to TG2
• B. Move the BIG-IP Managers from TG1 to TG2
• C. Create a new partition and set the default traffic group to TG2
• D. Modify the default traffic group of the Common partition to TG2

Answer: C

NEW QUESTION # 37
Exhibit.

- The ITM devices LTM 1 and LTM2 are configured in Device Group X (Sync-Failover)
- LTM3 and LTM4 are configured in Device Group Y (Sync-Only)
- An LTM specialist configures Device Group Z (Sync-Only) to keep several profiles in (sync-Only) to keep several profiles in sync across all devices.
- Device GROUP X has four Traffic Groups A, B, C and D configured.
- Device Group Y has four Traffic Groups E, F, G, and H configured
- Auto Fallback IS NOT Enabled.
- Each Device group is healthy and able to pass traffic for any traffic group assigned to that Device Group.
The data center that contains LTM2 and LTM4 loses power. After 10 minutes; power is restored and all devices are up and healthy.
What is the state of each Traffic Group on each ITM device after power is restored?
A)

B)

C)

D)

• A. Option D
• B. Option C
• C. Option B
• D. Option A

Answer: D

NEW QUESTION # 38
An application requires load balancing functionality. The application must be encrypted to the client.
Certain content must be manipulated by the following IRule:

Which set of profiles must be applied to the virtual server?

• A. TCP, HTTP, OnceConnect, Stream
• B. Fast L4, HTTP server SSL Stream
• C. TCP, HTTP, Client SSL, Stream
• D. TCP, HTTP server SSL Stream

Answer: C

Explanation:
Client encryption is required , clientssl, irule contains HTTP events and stream execution, http profile stream profile.

NEW QUESTION # 39
An organization's development team creates an application to put behind the F5 LTM device. The application can be quite load intensive at first, and then evens out over time. The team's load balancing method needs to select a pool after taking into account the pool member's response over the time to avoid landing on a busy pool member.
Which of the following load balancing methods meets this requirement?

• A. Dynamic (node)
• B. Predictive (member)
• C. Observed (member)
• D. Fastest (application)

Answer: B

NEW QUESTION # 40
A web application is configured as follows:

What should be modified to set a maximum request limit?

• A. Pool settings
• B. HTTP profile
• C. Virtual server settings
• D. ICP Profile

Answer: B

NEW QUESTION # 41
An LTM Specialist plans to enable connection mirroring for a virtual server in an HA environment.
What must the LTM Specialist consider before implementing the configuration change?

• A. Creating the required separate interface for connection mirroring
• B. Decreased number of possible concurrent connections to that virtual server
• C. Impact on system performance that might be noticeable
• D. The add-on license that is required for this feature to be available

Answer: C

Explanation:
Connection mirroring will bring performance consumption

NEW QUESTION # 42
in which Application Visibility and Reporting (AYR) profile must the SMTP profile be defined to configure notifications via email?

• A. App analytics profile
• B. default analytics profile
• C. custom analytics profile
• D. virtual server profile

Answer: C

NEW QUESTION # 43
A Web Server Administrator uses a manual process to display a page when the service is down.
Which feature on the LTM device should be used to automate the service down page? :

• A. Fallback Host
• B. Redirect Rewrite
• C. Action on Service Down
• D. Enable Request Queueing

Answer: A

NEW QUESTION # 44
An LTM Specialist discovers an issue with the custom http monitor that returns in a false positive status.
The end users cannot get the right website, but the http monitor marks the pool member UP.
What is causing the false positive result?

• A. The Content-Type has value "iso-8859-200".
• B. The end user should use another type of browser.
• C. The response is chunked.
• D. The response is compressed.

Answer: A

NEW QUESTION # 45
Remote users who access the LTM device are authenticated via Radius. The default remote user role is Guest Some users need LTM device with the Administrator role. The F5 Radius attributes are configure on the Radius server.
Which configuration item needs to be created?

• A. Remote User role
• B. User account
• C. User role
• D. Admin account

Answer: A

NEW QUESTION # 46
The web application team requests help from the LTM Specialist to Improve the performance of their web sites that are load balanced by the F5 LTM device with a Standard Virtual Server.
Which virtual server type will improve the performance of the web application servers?

• A. Performance (Layer 4)
• B. Performance (HTTP)
• C. Forwarding (IP)
• D. Stateless

Answer: B

NEW QUESTION # 47
The network team has recently added a new syslog server with IP address 10.1.1.1.
Which command adds the new syslog entry on the F5 LTM device?
A)

B)

C)

D)

• A. Option D
• B. Option A
• C. Option B
• D. Option C

Answer: D

NEW QUESTION # 48
Exhibit.

The LTM devices LTM1 and LTM2 are configured in a Device Group (Sync Failover) with Network Failover configured on both the management and HA and Internal VLANS. and ConfigSync is confined in a Device Group (Sync Failover) with Network Failover and internal are tagged on a single trunk with subnets Connection Mirroring is configured on both the HA interlace directly connected between LTM1 and LTM2, and the management interlace is connected to a management switch. The LTM devices have four Traffic Groups defined, and both LTM devices are healthy and capable of passing traffic for any of the Traffic Groups.
An LTM Specialist disconnects the cable for the HA network in an effort to test failover.
Which HA functionality works in this case?

• A. ConfigSync works. Connection Mirroring docs NOT work
• B. ConfigSync works Connection Mirroring works
• C. ConfigSync does NOT work. Connection Mirroring floes NOT work.
• D. ConfigSync does NOT work; Connection Mirroring works

Answer: D

NEW QUESTION # 49
An LTM device is configure with the wildcard virtual servers displayed below.
A client connection is made to 172.24.31.14:443.

• A. VS_HTTP_WILDCARD
• B. VS_172_24_1_WILDCARD
• C. VS_HTTPS_WILDCARD
• D. VS_172_24_WILDCARD

Answer: D

Explanation:
Match the network segment first and then port.

NEW QUESTION # 50
Refer to the exhibit.

The http monitor is applied to a pool. All members are enabled. One server responds as follows.

What is the resulting status of this poo! member?

• A. Offline (Disabled)
• B. Available (Enabled)
• C. Unavailable (Disabled)
• D. Offline (Enabled)

Answer: D

Explanation:
The first picture "Send String" and "Receive String" are not clear. Send String should be "GOOD", the response packet does not contain this keyword. Receive Disable String is completely unclear. If the response packet contains the content of Receive Disable String at this time, it will be Available (Disabled), If the content of Receive Disable String is not included, then Offline (Enabled).

NEW QUESTION # 51
An LTM Administrator receives an email from the NOC stating that the switch connected to the backend server was shut down for maintenance. The BIG-IP device handles only UDP traffic. The BIG IP device did not fail over to a DR location when no pool members were available.
When the LTM Administrator checks the pool, it confirms that the monitor is still marking UP the pool member.
A tcpdump of the traffic shows the following output:

A list of the monitor configuration shows the following:

Which two modifications to the LTM configuration will mark this pool member down, when the switch is down? (Choose two.)

• A. enable reverse and wait for the next connection
• B. enable manuai-resume on the same monitor
• C. increase the timeout to three times the interval
• D. add a reverse string to the game monitor
• E. also assign a gatewayjcmp monitor to the pool

Answer: D,E

NEW QUESTION # 52
A web server is being overloaded with HTTPS traffic. To decrease the load on the server, the LTM Specialist and the Server. Administrator decide to perform SSL offloading on the LTM device. The configuration of the virtual server is as follows:

Which change must be made to the configuration to perform SSL offloading?

• A. Remove the clients profile
• B. Remove the clientssl and serverssl profiles
• C. Remove the severssl profile
• D. Remove the clientssl and http profiles

Answer: C

NEW QUESTION # 53
Refer to the exhibit.

The pool shown is configured with four pool members in a variety of states. The application is receiving a large number of request. The LTM Specialist needs to make changes to make sure that all members receive the same levels of traffic.
Which changes need to be made?

• A. Enable 10.80.1.40 and 10.80.1.1.20 disable group activation, enable Round Robin
• B. Enable 10.80.1.40 and 10.80.1.20 disable priority group activation, enable ratio.
• C. Enable 10.80.1.40 disable priority group activation, enable ratio
• D. Enable 10.80.1.20 disable priority group activation, enable Round Robin

Answer: A

NEW QUESTION # 54
Refer to the exhibit.

The LTM devices LTM3 and LTM2 have four Traffic Groups defined with approximately the sar of failover objects defined in each group.
- Traffic Groups A and C have Default Device set to LTM1
- Traffic Groups Band D have Default Device set to LTM2.
- Traffic Groups B and C do NOT have Auto Failback enabled. Traffic Groups A and D have Auto Failback enabled with a timeout value of 60 seconds.
- Traffic Groups A and D have Auto Fallback enabled with a timeout value of 60 seconds.
Both LTM devices are healthy and able to pass traffic for any Traffic Group.
LTM1 loses connectivity on interface 1.4. The LTM Specialists notified 60 seconds after the interface goes down.
What is the state of the Traffic Groups on each LTM device?

• A. LTM1: No Traffic Groups
  LTM2: Traffic Groups A, B, C, and D
• B. LTM1: Traffic Group C
  LTM2: Traffic Groups A, B, and 0
• C. LTM1: Traffic Groups B and C
  LTM2: Traffic Groups A and 0
• D. LTM1: Traffic Groups A, B, C, and D
  LTM2: No Traffic Groups

Answer: A

Explanation:
If the 1.4 port is down and failsafe is triggered, the whole machine will become a standby, and all Traffic Groups will be cut away, and no Traffic Group will remain.

NEW QUESTION # 55
A virtual server configuration for traffic destined to a server is as shown:

HTTP traffic is destined to the 10 10.20.1 server from the source
Based on precedence, which virtual server accepts this traffic?

• A. MyVS4
• B. MyVS2
• C. MyVS3
• D. MyvS1

Answer: B

NEW QUESTION # 56
An LTM Specialist decides to offload SSL traffic on the LTM device instead of just passing it through. The LTM Specialist needs to change the configure from a Performance (Layer 40 virtual server to a Standard virtual server with SSL offload.
Which two element the LTM Specialist consider when performance this task? (Choose two.)

• A. CPU load
• B. Port exhaustion
• C. Connection mirroring
• D. Memory load
• E. Sensitive connections

Answer: A,D

NEW QUESTION # 57
......

301a Real Exam Questions and Answers FREE: https://examtorrent.vce4dumps.com/301a-latest-dumps.html