Prepare Important Exam with 500-220 Exam Dumps(2023) 

Pass Exam Questions Efficiently With 500-220 Questions

NEW QUESTION # 24
In an organization that uses the Co-Termination licensing model, which two operations enable licenses to be applied? (Choose two.)

• A. License a network.
• B. Call Meraki support.
• C. Wait for the devices to auto-renew.
• D. License more devices.
• E. Renew the Dashboard license.

Answer: D,E

Explanation:
Explanation
There are two operations in which a license can be applied, License more devices or Renew my dashboard license. This article will compare both operations and describe their behaviors.
https://documentation.meraki.com/General_Administration/Licensing/Meraki_Licensing_-_License_More_Devi These are the two operations that enable licenses to be applied in an organization that uses the Co-Termination licensing model. According to the Meraki Co-Termination Licensing Overview, there are two ways to add licenses to an organization:
Renewing the Dashboard license: This option allows you to extend the co-termination date of your organization by purchasing new licenses for the same or longer term as your existing licenses. You can renew your Dashboard license from the Organization > Configure > License Info page or from the Meraki Dashboard homepage.
Licensing more devices: This option allows you to add new devices to your organization by purchasing new licenses for them. You can license more devices from the Organization > Inventory page or from the Meraki Dashboard homepage.

NEW QUESTION # 25
Which API endpoint clones a new Organization?

• A. POST /organizations/{organizationId}/new
• B. POST /organizations/clone/{organizationId}
• C. PUT /organizations/{organizationId}/clone
• D. POST /organizations/{organizationId}/clone

Answer: A

NEW QUESTION # 26
Drag and drop the descriptions from the left onto the corresponding MX operation mode on the right.

Answer:

Explanation:

NEW QUESTION # 27
Refer to the exhibit.

Which two configurations are needed to successfully monitor custom applications that a user is accessing using Cisco Meraki Insight? (Choose two)

• A. The custom application uses HTTPS on TCP 443.
• B. The custom application uses HTTPS on port 8080.
• C. The custom application uses TLS on any ports.
• D. The custom application uses HTTP on port 8080.
• E. The custom application uses SMB/CIFS.

Answer: A,D

Explanation:
Explanation
https://documentation.meraki.com/MI/MI_Web_App_Health/Overview#:~:text=On%20this%20page%2C%20yo

NEW QUESTION # 28
Drag and drop the settings from the left into the boxes on the right to indicate if the setting will be cloned or not cloned using the Cisco Meraki MS switch cloning feature.

Answer:

Explanation:

Explanation
The settings that will be cloned using the Cisco Meraki MS switch cloning feature are:
port name
interface type
STP bridge property
The settings that will not be cloned using the Cisco Meraki MS switch cloning feature are:
switch management IP
switch name

NEW QUESTION # 29
A new application needs to be pushed to all iOS devices. Some devices report "NotNow" in the event log and do not install the application.
What does the "NotNow" event indicate?

• A. The application requires the most recent iOS version.
• B. The device cannot connect to Apple servers.
• C. The device is locked with a passcode.
• D. The device cannot connect to Cisco Meraki servers.

Answer: C

Explanation:
Explanation
The error message "NotNow" is seen in the Event Log on an iOS device's details page when an action cannot be performed because the device is locked with a passcode. These actions include pushing managed apps, installing profiles, and other actions. When this occurs the device will attempt to re-connect with the MDM server as soon as the device is unlocked in order to retry the action.
https://documentation.meraki.com/SM/Monitoring_and_Reporting/Status_of_%22NotNow%22_in_Systems_Ma

NEW QUESTION # 30
Drag and drop the descriptions from the left onto the permission types on the right.

Answer:

Explanation:

NEW QUESTION # 31
Refer to the exhibit.

During a Meraki AP deployment, the default SSID that the exhibit shows is broadcast. What causes this behavior?

• A. An AP does not have a wired connection to the network.
• B. An AP has never connected to the Meraki Cloud Controller.
• C. An AP cannot connect to the default gateway.
• D. An AP has Site Survey mode enabled.

Answer: B

Explanation:
Reference:
Troubleshooting_local_connection_issues_using_default_SSID_on_MR_Access_Points

NEW QUESTION # 32
When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?

• A. 802.11r
• B. Dual band operating with Band Steering
• C. Content filtering
• D. Bridge mode

Answer: B

Explanation:
Explanation
When band steering is enabled on an SSID, APs will stop advertising that SSID in 2.4GHz beacons. Since
2.4GHz-only clients that rely on a passive scan will not "see" that SSID in beacons, they might not be able to join this SSID unless they do an active scan or have been pre-configured with the SSID name and security settings (for example, a pre-shared key).
https://documentation.meraki.com/MR/Radio_Settings/Band_Steering

NEW QUESTION # 33
Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?

• A. MR Access Point
• B. MV Smart Camera
• C. MS Switch
• D. Meraki Insight

Answer: A

NEW QUESTION # 34
When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?

• A. 802.11r
• B. Dual band operating with Band Steering
• C. Content filtering
• D. Bridge mode

Answer: B

NEW QUESTION # 35
Refer to the exhibit.

Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?

• A. WebEx traffic will be load-balanced between both active WAN links.
• B. WebEx traffic will prefer WAN 1 as it is the primary uplink.
• C. WebEx traffic will prefer WAN 2 as long as it is up.
• D. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the "Conf" performance class.

Answer: B

NEW QUESTION # 36
A Cisco Meraki MV camera is monitoring an office and its field of vision currently captures work desks and employee computer screens. However, recording employee computer screens is prohibited by local regulation.
Which feature in Dashboard can be used to preserve the current position of the camera while also meeting regulation requirements?

• A. zone exclusion
• B. area or interest
• C. sensor crop
• D. privacy window
• E. restricted mode

Answer: D

Explanation:
Explanation
https://documentation.meraki.com/MV/Initial_Configuration/Privacy_Windows

NEW QUESTION # 37
Which Cisco Meraki product must be deployed in addition to Systems Manager so that Systems Manager Sentry enrollment can be used?

• A. MR Access Point
• B. MV Smart Camera
• C. MS Switch
• D. Meraki Insight

Answer: A

Explanation:
Explanation
https://documentation.meraki.com/MR/MR_Splash_Page/Systems_Manager_Sentry_Enrollment

NEW QUESTION # 38
A customer requires a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and 50 remote sites with a single uplink connection.
How many tunnels does each hub need to support?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: D

Explanation:
Explanation
https://documentation.meraki.com/Architectures_and_Best_Practices/Auto_VPN_Hub_Deployment_Recommen This is the number of tunnels that each hub needs to support in a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and 50 remote sites with a single uplink connection. This can be calculated by using the formula for the hub tunnel count in a hub-and-spoke topology1:
Hub Tunnel Count = (H x (H - 1) / 2 x L1) + (H x S x L1 x L2)
Where H is the number of hubs, S is the number of spokes, L1 is the number of uplinks for the hubs, and L2 is the number of uplinks for the spokes. In this case, H = 2, S = 50, L1 = 2, and L2 = 1. Therefore, Hub Tunnel Count = (2 x (2 - 1) / 2 x 2) + (2 x 50 x 2 x 1) Hub Tunnel Count = (2 x 1 / 2 x 2) + (200 x 2) Hub Tunnel Count = (2 / 2 x 2) + (400) Hub Tunnel Count = (1 x 2) + (400) Hub Tunnel Count = 2 + 400 Hub Tunnel Count = 402 This question is related to the topic of Auto VPN Hub Deployment Recommendations in the Cisco Meraki documentation. You can find more information about this topic in the Auto VPN Hub Deployment Recommendations article or the Meraki Auto VPN General Best Practices page.

NEW QUESTION # 39
Refer to the exhibit.

Which design recommendation should be considered?

• A. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.
• B. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
• C. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
• D. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.

Answer: B

NEW QUESTION # 40
What happens to an unsupervised iOS device when the "Meraki management" profile is removed?

• A. The "Meraki management" profile is removed. All configuration profiles that Systems Manager pushed are also removed.
• B. The "Meraki management" profile is removed and then pushed automatically by Systems Manager.
• C. The "Meraki management" profile cannot be removed.
• D. The "Meraki management" profile is removed. All configuration profiles that Systems Manager pushed remain.

Answer: A

NEW QUESTION # 41
......

500-220 Questions - Truly Beneficial For Your Cisco Exam: https://examtorrent.vce4dumps.com/500-220-latest-dumps.html