Tested Material Used To 350-501 Test Engine Exam Questions in here [Aug-2023]
Penetration testers simulate 350-501 exam PDF
Cisco 350-501 exam measures a candidate's knowledge in various areas such as core architecture, routing, switching, security, and automation. As a result, passing 350-501 exam is a testament to a candidate's ability to work with the latest Cisco technologies and solutions in service provider network environments.
Cisco 350-501 exam tests a candidate's proficiency in a variety of topics, including service provider architecture and services, MPLS and segment routing, VPN services, network automation, and network programmability. Earning this certification demonstrates that a candidate is capable of implementing and operating complex network technologies in a service provider environment.
NEW QUESTION # 135
Refer to the exhibit.
Router R1 is reporting that its BGP neighbor adjacency to router R2 is down, but its state is Active as shown.
Which configuration must be applied to routers R1 and R2 to fix the problem?
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: B
NEW QUESTION # 136
What is the role of NSO?
- A. Controls the turn-up of a device.
- B. Provides network monitoring services for Layer 3 devices.
- C. Provides public cloud services for customers that need Internet access.
- D. Maintains data storage.
Answer: A
NEW QUESTION # 137
Drag and drop the multicast concepts from the left onto the correct descriptions on the right.
1: PIM-DM 2:IGMP 3:PIM-SM 3:shared tree 4:source tree
Answer:
Explanation:
NEW QUESTION # 138
Refer to the exhibit.
An engineer needs to implement this QoS policy on customer's network due to ongoing slow network issues. What will be the effect on the network when the engineer implements this configuration?
- A. Traffic that is identified in the ciscopolicy class map will be marked with IP precedence 1 when it enters the pos0/2/0/0 interface.
- B. Traffic that is identified in the ciscopolicy class map will be remarked from IP precedence 1 to DSCP AF11 when it exits the pos0/2/0/0 interface.
- C. Traffic that is identified in the ciscotest class map will be marked with IP precedence 1 when it exits the poso/2/0/0 interface.
- D. Traffic that is identified in the ciscotest class map will be remarked from IP precedence 1 to DSCP AF11 when it enters the pos0/2/0/0 interface.
Answer: C
NEW QUESTION # 139
An engineer is setting up overlapping VPNs to allow VRF ABC and XYZ to communicate with VRF CENTRAL but wants to make sure that VRF ABC and XYZ cannot communicate. Which configuration accomplishes these objectives?
A)
B)
C)
- A. Option B
- B. Option A
- C. Option C
Answer: A
NEW QUESTION # 140
What is a role of NSO?
- A. It provides full lifecycle management of a device
- B. It automates the deployment of access points with its built-in wireless LAN controller
- C. It manages WAN infrastructure using a virtual switch
- D. It resides on a hypervisor that runs the Windows OS
Answer: A
Explanation:
Section: Automation and Assurance
Explanation/Reference:
NEW QUESTION # 141
Refer to the exhibit:
R1 is connected to two service providers and is under a DDoS attack Which statement about this design is true if uRPF in strict mode is configured on both interfaces'?
- A. R1 drops all traffic that ingresses either interface that has a FIB entry that exits a different interface
- B. R1 permits asymmetric routing as long as the AS-RATH attribute entry matches the connected AS
- C. R1 accepts source addresses on interface gigabitethernet0/1 that are private addresses
- D. R1 drops destination addresses that are routed to a null interface on the router
Answer: A
NEW QUESTION # 142
Refer to the exhibit.
A NOC engineer is configuring label-based forwarding from CSR to the EPC gateway. Cell-site operation and maintenance for IPv4 traffic between 10.20.10.1 and 192.168.10.10 is already up. CR1 and CR2 are configured as route reflectors for AG1 and AG2. Which action completes the configuration?
- A. Remove address-family labeled-unicast from the BGP session-group infra on AG1 for neighbor-group core.
- B. Configure AG1 to allow the 300:100 and 200:100 communities in the BGP_Egress_Filter route policy.
- C. Configure AG1 to allocate a label to the BGP routes that are received in the BGP session group transport.
- D. Apply the BGP_Egress_Filter route policy to the BGP neighbor-group packet core on AG1.
Answer: D
NEW QUESTION # 143
Refer to the exhibit:
BGPsec is implemented on R1. R2. R3. and R4 BGP peering is established between neighboring autonomous systems Which statement about implementation is true?
- A. BGP updates from the eBGP peers are appended with an additional AS path value that is statically set by the domain administrator
- B. BGP updates from the iBGP peers are appended with a community of local-as
- C. BGP updates from the eBGP peers are appended with a BGPsec attribute sequence that includes a public key hash and digital signature
- D. BGP updates from the all BGP peers are appended with a community of no export
Answer: C
NEW QUESTION # 144 
Refer to the exhibit. A network engineer is configuring MPLS LDP synchronization on router R1. Which additional configuration must an engineer apply to R1 so that it will synchronize to OSPF process 1?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
Section: MPLS and Segment Routing
NEW QUESTION # 145
Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right
Answer:
Explanation:
NEW QUESTION # 146
Refer to the exhibit.
An engineer configured multicast routing on client's network. What is the effect of this multicast implementation?
- A. R2 is unable to share information because the ip pirn autorp listener command is missing.
- B. R2 floods information about R1 throughout the multicast domain.
- C. R1 floods information about R2 throughout the multicast domain.
- D. R2 is elected as the RP for this domain.
Answer: A
NEW QUESTION # 147
Refer to the exhibit. A network engineer must meet these requirements to provide a connects, solution:
- The customer connected to Area 2 needs to access the application in
Area 1 on the 10.10.10.0/24 subnet
- The Customer must not have access to the 20.10 30.0/24 subnet.
- The service provider must make sure that the Area 2 routing database
limits the number of IP addresses in the routing table.
Which two configurations must be implemented to meet the requirements? (Choose two)
- A. Set a tag value of 200 to match the summary address 10.0.0.0/16 on R3.
- B. Apply the route map for tag 200 and teak Level 2 routes into Level 1 Area 2 on R4.
- C. Set a tag value of 200 to match the summary address 10.0.0/16 on R2.
- D. Apply the route map for tag 200 and leak Level 2 routes into Level 1 Area 2 on R3
- E. Set a tag value of 200 to match the summary address 10.0.0./16 on R1.
Answer: A,D
NEW QUESTION # 148
Refer to the exhibit. A network engineer wants to monitor traffic from the application server and send the output to the external monitoring device at 172.16.20.5.
Application server traffic should pass through the R1 Eth2/1 interface for further analysis after it is monitored. Which configuration must be applied on the R1 router?
- A. Configure the ip flow monitor FLOW-MONITOR-10 input command on the Ethernet1/0 interface.
- B. Configure the ip flow monitor FLOW-MONITOR-10 output command on the Ethernet 2/1 interface.
- C. Configure the FLOW-MONITOR-20 command.
- D. Configure the flow exporter EXPORTER-10 destination 192.168.20.4 command.
Answer: A
NEW QUESTION # 149
Refer to the exhibit. An engineer configured R6 as the headend LSR of an RSVP-TE LSP to router XR2, with the dynamic path signaled as R6-R2-R5-XR2. and set the OSPF cost of all links to 1. MPLS autotunnel backup Is enabled on all routers to protect the LSP.
Which two NNHOP backup tunnels should the engineer use to complete the implementation?
(Choose two.)
- A. The R2 backup tunnel path R2-R1-R4-XR1-XR2.
- B. The R2 backup tunnel path R2-R5 across the alternate link.
- C. The R6 backup tunnel path R6-R1-R4-R5.
- D. The R6 backup tunnel path R6-R2-R5
- E. The R6 backup tunnel path R6-R1-R2.
Answer: A,C
NEW QUESTION # 150
Refer to the exhibit.
Which additional configuration must an engineer apply to the edge router to inject a default route into the MP-BGP address family for the internet_shared_service dedicated VRF?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: C
NEW QUESTION # 151
A network engineer is adding 10Gbps link to an existing 2X1Gbps LACP-based LAG to augment its capacity. Network standards require a bundle interface to be take out of service if one of its member links does down, and the new link must be added with minimal impact to the production network. Drag and drop the tasks that the engineer must perform from the left into the sequence on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 152 
Refer to the exhibit. After implementing a new design for the network, a technician reviews the pictures CLI output as part of the MOP.
Which two elements describe what the technician can ascertain from the ImpNull output? (Choose two.)
- A. Penultimate Hop Popping is in use for the prefix displayed.
- B. Label 0 is used for the prefix displayed and will be part of the MPLS label stack for packets destined for
192.168.10.10. - C. Ultimate Hop Popping is in use for the prefix displayed.
- D. Label 0 is used for the prefix displayed, but will not be part of the MPLS label stack for packets destined for
192.168.10.10. - E. Label 3 is in use for the prefix displayed and will be part of the MPLS label stack for packets destined for
192.168.10.10.
Answer: A,B
Explanation:
Section: MPLS and Segment Routing
NEW QUESTION # 153
......
Authentic Best resources for 350-501 Online Practice Exam: https://examtorrent.vce4dumps.com/350-501-latest-dumps.html