Updated NS0-184 Dumps PDF - NS0-184 Real Valid Brain Dumps With 60 Questions!

100% Free NS0-184 Exam Dumps Use Real NCSIE ONTAP Dumps

NEW QUESTION 23
You installed a new 4-node AFF A400 ONTAP 9.8 cluster. The AFF400 controller data ports were automatically discovered by "automatic port placement".
In this scenario, which two ONTAP network settings were automatically configured? (Choose two.)

• A. broadcast domains
• B. IPspaces
• C. subnets
• D. routes

Answer: C,D

 

NEW QUESTION 24
You are preparing to install a new 2-node AFF A250 system at a customer site with an existing cluster that uses NetApp CN1610 cluster interconnect switches.
In this scenario, what are two valid actions for this installation? (Choose two.)

• A. Add the new nodes to the existing cluster and switches.
• B. Create a new 2-node switchless cluster.
• C. Create a new 2-node switched cluster that uses the CN1610 cluster switches.
• D. Migrate the existing cluster to new switches and add the new nodes.

Answer: C,D

Explanation:
Reference:
https://kb.netapp.com/Advice_and_Troubleshooting/Flash_Storage/AFF_Series/Controller_Hardware_Upgrade3A_Adding_AFF_A250_nodes_to_existing_cluster_report_HA_interconnect_errors_and_c
annot_perform_takeover

 

NEW QUESTION 25
You installed a new pair of Cisco 92300YC cluster switches at a customer's site. Before you install any files on the switch, you want to view the current configuration.
In this scenario, which command would you use to accomplish this task?

• A. config show
• B. switchcfgshow
• C. fabricshow
• D. show running-config

Answer: B

 

NEW QUESTION 26
You install a 4-node cluster with an AFF A400 HA pair and a FAS8300 HA pair. After setup, you are asked to review the audit logs on each controller from a Web browser.
In this scenario, which method provides access to the logs from a Web browser?

• A. DNS
• B. SPI
• C. ACP
• D. ADP

Answer: B

 

NEW QUESTION 27
You are asked to add a new HA pair to an existing 2-node switchless AFF A220 cluster. You must first convert to a 2-node switched cluster using Broadcom BES-53248 cluster switches.
Which two conditions must be fulfilled before you start the migration? (Choose two.)

• A. All cluster LIFs must have an MTU size of 1500.
• B. All cluster LIFs must be in the up state and on their home ports.
• C. The 2-node switchless configuration must be properly set up and functioning.
• D. The "Enabled Switchless Cluster" option must be manually set to "false".

Answer: B,C

 

NEW QUESTION 28
What are two ONTAP storage efficiency technologies that would be used on an AFF A400 cluster? (Choose two.)

• A. FlexClone volumes
• B. FlashCache
• C. Flash Pool
• D. thin provisioning

Answer: B,C

 

NEW QUESTION 29
You are installing a new AFF A400 cluster that is running ONTAP 9.7 software. You are asked to attach an Amazon S3 cloud tier for FabricPool technology.
In this scenario, which two NetApp License File (NLF) types are supported for cloud tiering? (Choose two.)

• A. base
• B. master
• C. perpetual
• D. term-based

Answer: C,D

 

NEW QUESTION 30
In an ONTAP switched cluster, which three types of traffic travels over the cluster network? (Choose three.)

• A. remote cluster peering
• B. cluster database replication
• C. Epsilon voting
• D. intracluster SnapMirror
• E. intercluster SnapMirror

Answer: A,B,E

 

NEW QUESTION 31
Which command would be used to measure the throughput and latency of traffic between nodes?

• A. cluster ping-cluster
• B. qos statistics workload performance show
• C. statistics node show
• D. network test-path

Answer: D

 

NEW QUESTION 32
You want to disconnect a DS224C shelf with 3.8 TB NetApp Storage Encryption (NSE) SSDs to an AFF A300 HA pair with two DS224C shelves with 3.8 TB SSDs without NSE in one stack.
In this scenario, how would you add the shelf?

• A. Connect the shelf to an HA pair with NSE drives.
• B. Create a new stack on the HA pair to add the shelf.
• C. Add the shelf to the existing stack.
• D. License NSE and add the shelf to this HA pair as a new stack.

Answer: C

 

NEW QUESTION 33
A storage administrator is trying to upgrade a pair of FAS2520s with internal SATA storage to a new 2-node FAS8300 cluster. The storage administrator wants to preserve the existing data.
In this scenario, which two capabilities are available to the storage administrator? (Choose two.)

• A. the ability to move the volumes from the old nodes to the new nodes
• B. the ability to pull out the tray of internal disks of the FAS2520s and reseat the tray in the internal storage of the FAS8300s
• C. the ability to convert the FAS2520s to disk shelves and attach them to the new nodes
• D. the ability to create a 4-node MetroCluster across the four nodes

Answer: C,D

 

NEW QUESTION 34
Click the Exhibit button.

Which set of components on a FAS9000 are highlighted in the exhibit?

• A. SAS-Module, Controller, USB-Port, FlashCache-Module
• B. NVRAM-Module, Controller, Serial-Port, FlashCache-Module
• C. Powersupply, Controller, USB-Port, NVRAM-Module
• D. FCVI-Module, Controller, Serial-Port, FlashCache-Module

Answer: D

 

NEW QUESTION 35
You are setting up a peer relationship between two ONTAP clusters.
In this scenario, which two statements are true regarding authentication?

• A. Peering authentication is required before enabling peering encryption.
• B. Peering authentication status can be verified with the cluster peer show command.
• C. Peering authentication can use an ONTAP generated passphrase.
• D. Peering authentication can be configured using LDAP users and groups.

Answer: B,C

 

NEW QUESTION 36
You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.
Which tool would you use to accomplish this task?

• A. NetAppDocs output report
• B. ONTAP System Manager
• C. Active IQ scheduled reports
• D. Active IQ Config Advisor worksheet

Answer: C

 

NEW QUESTION 37
Which three components are required when setting up a new ONTAP cluster? (Choose three.)

• A. cluster management IP
• B. password
• C. node management IP
• D. intercluster IP
• E. Advanced Drive Partitioning

Answer: A,C,D

 

NEW QUESTION 38
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?

• A. broadcast domains
• B. BGP
• C. IPspaces
• D. routing

Answer: A

 

NEW QUESTION 39
You have a new 2-node FAS8700 ONTAP 9.8 cluster. One of the nodes has 24x16 TB NL-SAS disks assigned and available for a new aggregate. You created the aggregate with one RAID group and two spare disks.
In this scenario, how many data drives are in the aggregate?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: B

 

NEW QUESTION 40
You are installing a new FAS2750 cluster with 24 HDDs for a customer to run a NAS workload. The customer requests that the HA pair have only a single aggregate that is located on Node 1. Maximum capacity is required.
Which action must be performed to ensure that the customer's requests are satisfied?

• A. Assign all data LIFs to Node 1.
• B. Assign all the data partitions from Node 2 to Node 1, and create a single aggregate.
• C. Perform a takeover of Node 2 to ensure that it does not run.
• D. Assign all the partitioned disks from Node 2 to Node 1, and create a single aggregate.

Answer: A

 

NEW QUESTION 41
......

How the Network Appliance NS0-184 Certification Exam can help?

In this modern world, technology is rapidly developing and becoming more sophisticated. This is making the job of IT professionals more difficult and challenging. They have to keep themselves updated with the latest trends and technologies in the field of the information technology and digital world. From an employee's perspective, they have to keep themselves updated with the latest trends and technologies to get promoted in their organization. If you want to succeed in your career, then you should start preparing for the Network Appliance NS0-184 exam. NS0-184 Dumps are the best choice for you if you want to become a certified NetApp technician.

The Network Appliance NS0-184 certification exam will help you to achieve your goals and be successful in your career. The namespace configured by the Network Appliance NS0-184 exam will help you to secure your future and succeed in your career. From an employer or organization's perspective, they want to hire qualified IT professionals who can provide quality solutions to their customers. The Network Appliance NS0-184 certification exam is a great option for them to hire IT professionals who can help them to achieve their business goals. The Network Appliance NS0-184 examines the understanding of NetApp products and how to use them. This is the reason why it is considered the best certification exam for IT professionals and can help them to succeed in their careers. The cluster peering feature is a very useful feature that can help you to scale up your storage.

 

Pass Your NS0-184 Exam Easily With 100% Exam Passing Guarantee: https://examtorrent.vce4dumps.com/NS0-184-latest-dumps.html